Designing a Hangar Loft: What to Consider Before Construction

You've decided to build a loft in your hangar. Maybe you're envisioning the ultimate man cave with a full bar, comfortable lounge, and a place to watch the game. Perhaps you want a private office, somewhere to spend the night after a long day of flying, or simply a space to get away without leaving the airport.

It sounds fairly straightforward. You have a hangar with plenty of room, so why not build upward and take advantage of the extra space?

Before you know it, you're ten floorplans into the process, trying to fit a bathroom near the stairs, figure out how much ceiling height you'll have upstairs, and determine whether you'll still have enough room to park your airplane. What initially seemed like a simple project has suddenly become a much bigger puzzle.

I've worked through this exact challenge with clients, and one of the first things I explain is that designing a hangar loft isn't just about what you want upstairs. It's about understanding everything that needs to happen underneath it.

Before we can determine what your loft should look like, we need to understand how you intend to use the entire hangar.

Start With What's Going Inside the Hangar

When someone approaches me about designing a hangar loft, my first questions aren't necessarily about the kitchen, bathroom, or living area. I want to know what's going inside the hangar.

What airplanes are you storing? How many? Are there plans to purchase a larger airplane in the future? Will you also have vehicles, motorcycles, a golf cart, or a workshop? Perhaps most importantly, are you primarily using the hangar for airplane storage, or do you want it to function as a place where you regularly spend time?

Those answers influence almost every design decision that follows. A hangar used exclusively for airplane storage has very different needs from one that also accommodates woodworking, vehicle storage, entertaining, and occasional overnight stays.

For example, if your hangar needs to accommodate multiple airplanes, the location and footprint of the loft become especially important. You can't simply assume that placing everything along the back wall will leave enough usable room. We need to consider how the airplanes will actually move into position, where their wings and tails will sit, and whether the proposed construction interferes with maneuvering or access.

The goal isn't to squeeze as much loft space into the building as possible. It's to determine how much space we can dedicate to the loft without compromising the primary purpose of the hangar. Once you've built walls, installed stairs, and committed to a particular layout, changing your mind becomes considerably more complicated.

Your Hangar's Roofline May Have Other Plans

One of the biggest misconceptions I encounter is the assumption that a large hangar automatically means there's plenty of room for a large loft. Unfortunately, that's not always the case.

Hangars vary significantly in their dimensions, roof configurations, structural systems, and available interior heights. The shape of the roof can have just as much influence on the loft design as the overall square footage.

A hangar with a gable roof, for example, may have generous height near the center of the building but considerably less usable height as you move toward the sidewalls. That difference matters when you're considering a second level.

You might have enough floor area to extend a loft across the entire back wall, but that doesn't necessarily mean you'll have comfortable or code-compliant headroom throughout the upper level. You also need to account for the depth of the new floor structure, which reduces the clear height available below and affects the usable height above.

Suddenly, that expansive loft you saw on Pinterest may not be realistic for your particular building. Instead of forcing a layout that doesn't work, we have to understand the building's limitations and determine how to use the available space intelligently.

Sometimes that means reducing the size of the loft, relocating the stairs, changing the configuration, or keeping certain functions on the ground floor. Other times, it means recognizing that the original wish list needs to be adjusted.

Every hangar is different, and what works beautifully in one building may be completely impractical in another.

A Real Project: When a Full Loft Wasn't the Best Solution

I recently worked through a hangar loft design where the original vision was to create a full loft across the back of the building. At first glance, it seemed like a reasonable idea.

The client wanted to maximize the available space while still maintaining enough room for the airplanes, but as we began studying the actual hangar dimensions and roofline, it became clear that the low gable roof was going to create a significant challenge.

We could extend the loft farther across the wall, but doing so meant sacrificing usable height or creating areas that wouldn't function the way the client expected. We also had to account for the airplanes underneath, which meant there wasn't a perfect solution that accommodated every initial idea without compromise.

After exploring different layouts, we moved toward a more concentrated loft positioned in the middle of the back wall, where the available roof height made better use of the space. This allowed us to organize the functions beneath the loft while preserving more usable hangar area for airplane parking.

One of the more challenging decisions involved the bathroom. Initially, we explored different locations beneath the loft, but the bathroom footprint would have extended into valuable space needed for the airplanes.

Instead, I designed the bathroom to sit partially underneath the staircase, with the remaining portion positioned immediately beside it. Since an airplane couldn't maneuver past the staircase anyway, we were able to use floor space that would otherwise have been lost rather than extending the bathroom farther into the usable hangar area.

We also considered alternatives such as reducing the bathroom size or eliminating a dedicated laundry area. These weren't necessarily the most exciting conversations, but they were important because the goal wasn't simply to produce a floorplan that showed everything the client wanted. It was to develop a layout that made the most sense for the building, the airplanes, and the way the client intended to use the space.

Sometimes that requires reconsidering the original vision, even when the first idea seems like the obvious choice.

Decide What Your Loft Actually Needs to Do

One of the things I enjoy about designing hangar lofts is that they can offer more flexibility than a traditional hangar home. You're not necessarily trying to accommodate an entire household or create a full-time residence. Instead, the loft might serve one very specific purpose or a combination of several.

For some owners, it's a comfortable place to relax between flights. For others, it's a private office overlooking the hangar. Those who love entertaining might envision a lounge with a bar, television, game table, and seating for friends. Some owners also want sleeping accommodations, a kitchenette, or a full bathroom for occasional stays, where permitted.

This is where I encourage clients to think carefully about their priorities, because not every hangar loft needs a full kitchen, a large bathroom, a separate bedroom, and a dedicated laundry room. Those features may be important for one owner and completely unnecessary for another.

If you're only planning to spend a few hours at the hangar on weekends, a compact refreshment area and powder bathroom might meet your needs. If you frequently spend long days at the airport, you may place greater value on a shower, comfortable seating, and a place to prepare meals. Someone whose primary goal is entertaining might prefer to dedicate more square footage to the lounge and bar rather than dividing the space into multiple small rooms.

If you're envisioning temporary living quarters, we also need to determine whether that use is permitted before developing the layout around it. Intended occupancy and use can affect applicable building, fire, accessibility, plumbing, and other requirements. Airport agreements, local regulations, and HOA restrictions may also apply.

I like to establish the non-negotiables early by asking what absolutely needs to be included, what would be nice to have, and what the owner is willing to sacrifice if the space simply won't accommodate everything. Those answers help me determine how compact we can make the loft without compromising the functions that matter most.

Don't Let the Staircase Become an Afterthought

Stairs are one of those elements that seem simple until you begin working them into a hangar loft. You know you need a way to reach the upper level, but the location of the staircase can dramatically influence the layout of both floors.

Place it in the wrong location, and you may lose valuable airplane parking space, create an awkward entry into the loft, or interrupt an area that could have been used for storage or another function. The staircase also requires appropriate headroom, landings, structural support, and clearances based on the applicable requirements.

Depending on the design and permitted use, the area beneath and beside the staircase might accommodate storage, cabinetry, or another carefully planned function. In the project I mentioned earlier, the staircase became an important part of solving the bathroom layout.

By positioning part of the bathroom beneath the stairs and extending the remainder beside them, we took advantage of floor space that was already restricted by the staircase itself. This helped preserve more of the open hangar floor for airplane parking while accommodating a necessary function.

Rather than treating the staircase as something to squeeze into the design after everything else was arranged, I prefer to consider how it can contribute to the overall space planning. Every element should serve a purpose, especially when we're working with limited square footage.

Think Beyond the Loft Floorplan

One of the things I frequently remind clients is that a floorplan only tells part of the story. It's possible to create a layout that looks perfectly reasonable in two dimensions but feels completely different once you begin considering the actual height, volume, and relationships between spaces.

This is especially true in a hangar, where a large open floor area doesn't necessarily mean every part of the building has the same usable vertical space. The roof slope, structural members, airplane clearances, and proposed loft floor all influence what can realistically be built.

That's why I evaluate hangar loft designs in both two and three dimensions. I want to understand how the upper level relates to the hangar below, what someone will see when they enter the space, and whether the layout feels comfortable rather than simply fitting within the available measurements.

I also walk clients through their floorplans and explain why I've made certain decisions. Sometimes I can see an issue that isn't immediately obvious to someone looking at the drawing, such as a door swinging in a direction that makes the room feel awkward, a bathroom interfering with circulation, or a wall creating an unnecessary obstruction where the owner needs more maneuvering room.

Those details can seem insignificant during planning, but they become much more noticeable once the space is built. I'd much rather have those conversations while we're still exploring options than after construction has begun.

Plan the Practical Details Before You Start Building

Once the layout begins taking shape, we also need to consider how the loft will function day to day.

Lighting is a great example. The hangar may need bright, functional lighting for working around airplanes, while the loft might benefit from softer lighting for relaxing, entertaining, or watching television.

If the loft includes a kitchen or bar, we need to consider appliance locations, cabinetry, electrical requirements, plumbing, and ventilation. A bathroom or laundry area introduces additional coordination, particularly when working within an existing building.

Heating and cooling are also important. An upper-level space beneath a hangar roof may experience very different temperatures from the main floor, and the mechanical design needs to account for the intended use and building conditions.

Structural and life-safety considerations deserve equal attention. An existing hangar wasn't necessarily designed to support a new occupied mezzanine or loft, so a qualified structural engineer needs to evaluate the existing building and proposed loads. Depending on the use, the project may also require specific fire separation, means of egress, and other safety provisions.

Before construction, the design team should verify the applicable local building requirements and any airport or property restrictions. These aren't details I want a client discovering after they've already committed to construction. I want the design to be thoughtfully developed so the appropriate professionals can evaluate and coordinate it before work begins.

Sometimes the Best Design Requires a Compromise

One of the more challenging parts of my job is explaining that a client's original vision may not be the best solution for their particular space. I understand why that can be disappointing, especially when someone has spent months imagining a full loft, a large bathroom, a comfortable bedroom, and an entertaining area.

I believe part of being a good designer is being willing to have those conversations. I'm going to explore the possibilities, study alternative layouts, and look for creative ways to make the space work. I'm also going to tell you when something isn't practical or when one decision creates a problem somewhere else.

There are often several ways to arrange a hangar loft, and the challenge is determining which one best supports the owner's priorities while respecting the limitations of the building.

Sometimes that means making the loft smaller so you have more usable space for your airplanes. It might mean keeping the bathroom compact, relocating a function downstairs, or realizing that a feature you originally thought was essential isn't nearly as important as something else.

Those decisions aren't necessarily sacrifices in the finished design. Often, they're what make the entire space work better.

Let's Design a Hangar Loft That Works for You

Whether you're envisioning a private hangar lounge, an entertainment space, a workshop with an upper-level retreat, or occasional living quarters, the best place to begin is by understanding how you want to use the entire hangar.

At Aeroview Design Co., I help hangar owners explore space planning options, develop thoughtful interior concepts, and create designs that balance their wish lists with the realities of their buildings.

Before you commit to a layout or begin construction, let's explore what's possible for your space.

Book a Discovery Call →

Next
Next

What Happens After Your Hangar Home Floorplan Is Finalized?